125 * 50 Mm Mini Lathe Machine, 3800 RPM Variable Speed Change, 150W Precision Mini Lathe, Milling Machine For Various Metal Turning

Mini Metal Lathe: The milling machine is made of rigid cast iron, which is a strong material with a long service life. It is designed with buttons and knobs for easy use.Variable Speed: The metal lathe has a variable speed of 100-3800±10%rpm. The speed can be easily changed by just turning the switch. At the same time, the indicator above will inform you of the being performed.Three-jaw chuck: The mini lathe comes with a 50mm three-jaw chuck and a 50mm spindle bore. The chuck uses P3 bearings, which are widely used where precision machining is required and high rotation speeds are achieved.4-way tool holder: The 4-way tool holder on the lathe is easy to adjust. It is also convenient to change the tool. With the tool holder, you can make bevel cuts.Stable: The lathe has a center support and a tailstock to support the longitudinal rotation axis of the workpiece you want to machine.Wide Application: The metal lathe does not take up a lot of space in the workshop or garage when working, and can manufacture bushings, spindles, prototypes, models, etc.Product parameters:Lathe size (length x width x height): 440*270*210mm/17.32*10.6*8.3inProcessing accuracy: 0.01~0.02mmWorkpiece rotation diameter on lathe: ≤110mmMaximum processing diameter: 110mmMaximum processing length: ≤125mmSpindle through hole diameter: 10mmTail shaft aperture: 10mmTail shaft thread: M14*1mmSlide plate lateral stroke: 50mmMotor output power: 150WSpindle speed range (stepless speed regulation): 100-3800±10%rpmPackaging size (length x width x height): 510*380*300mm/20*15*11.8inNet weight/gross weight: 14/16kg/30.86/35.27lbPackaging content1 x Mini metal lathe1 x Center bracket1 x Tailstock ejector pin3x Allen wrench4 x wrench

• 【Specifications】: Lathe size (length x width x height): 440*270*210mm/17.32*10.6*8.3in, Motor output power: 150W, Processing accuracy: 0.01~0.02mm,Workpiece rotation diameter on lathe: ≤110mm, Maximum processing diameter: 110mm, Maximum processing length: ≤125mm, Spindle through hole diameter: 10mm, Tail shaft aperture: 10mm, Tail shaft thread: M14*1mm, Slide plate lateral stroke: 50mm, Spindle speed range (stepless speed regulation): 100-3800±10%rpm
• 【Sturdy construction】: The mini lathe is made of high-quality HT200 cast iron, which is sturdy and wear-resistant. It is equipped with a 150W motor that can provide a lot of energy. If you like making models, it will be your meticulous assistant.
• 【Unlimited variable speed】 : Rotation speed range: 100-3800RPM. The mini lathe is equipped with variable speed to provide you with convenience for optimal work. This lathe allows you to move forward or backward at any possible speed. The feed speed can be adjusted manually or automatically. And there is an emergency button to use just in case.
• 【High precision】 ： Spindle bore: /10mm. The metalworking lathe is pre-installed with a 50mm diameter three-jaw chuck, which can clamp the material tightly, and there is also a splash guard to prevent metal chips.
• 【Wide Application】： The lathe can perform precision machining without taking up a lot of space in your workshop or garage, and can make bushings, spindles, prototypes, models, etc.